Used Equipment Sale – 10 Ton Top Running Free-Standing Bridge Crane with Two 160′ Runways

Excellent Condition – 10 Ton Top Running Free-Standing Bridge Crane with Two 160′ Runways

Used Free Standing Bridge Crane Runway - W.W. Cannon, Dallas TXTop running free-standing bridge crane runways are most commonly used when floor space is limited and overhead clearances are not an issue.

Used Cost Sale –

$109,000 + The Cost of Installation

Cost of New System –

$165,000 without The Cost of Installation

Included –

Crane System, Two 10 Ton Bridges/160′ Runways, Header Braces, Hardware

Details

Free Standing Top Running Bridge Crane Details

Free standing, top running, header braced overhead crane systems  are self supporting and work well where minimum floor obstructions are essential and the lowest obstruction in the building is high enough for the system to be installed while still giving adequate headroom (hook height).

A main component of a free standing, header braced crane runway system is a top running bridge crane designed with the bridge on the top of the runway.

No knee braces are required, increasing valuable production space. The runway is supported by the free standing support columns each pair tied together by a header.

Stand alone workstation bridge cranes do not rely on building or support column integrity. Header braced systems are ideal when the lowest obstruction in the building is high enough that it does not limit the hook height.

Features

Free Standing Top Running Bridge Crane Features

  • Columns bolt directly to a 6 inch concrete slab or reinforced concrete foundations
  • Electrical motor driven
  • Bolt together construction allows for easy installation, relocation, and expansion
  • Expandable, and able to carry multiple bridge cranes
  • Can be designed for unlimited runway lengths and multiple bridge cranes
  • Simple to set up
  • Ships complete with:
    • hardware
    • assembly manual
    • runway electrification
Specs

General Specifications

  • Age > 12 years
  • Span > 43′-0″
  • Capacity > 20,000 lbs (10 US Tons) CMAA Class “C” Service/Indoors
  • Bridge Speed > 100 FPM Infinitely Variable 2 @ .60 HP – VFD Control
  • Trolley Speed > 65 FPM Infinitely Variable 2 @ .60 HP – VFD Control
  • Hoist Speed > 20/3.2 FPM 2 Speed 14.8 HP – Magnetic Control
  • Hoist Lift > 29′-6″ Available
  • Hoist Type > “R&M” SX50410100p55FDLOF (Reeved Four Part Single)
  • Bridge Electrification > Flat Cable Festoon System
  • Runway Electrification > 162 Ft 4 Cond. “Safelec 2” By OMI
  • Power Supply Voltage > 460V 3PH 60 HZ Nema 4 & 3R Enclosures
  • Control Voltage > 115V 1PH 60HZ
  • Max. Wheel Load w/o Impact > 12,625 LBS
  • Wheelbase > 8′-2 7/16″
  • Total Weight > 9,140 LBS (7,790 LBS Bridge; 1350 LBS HST/TRLY)
  • Paint > OMI Standard “Safety Yellow”
Blueprints

Used Bridge Crane Runway Electrification Blueprint Image - W.W. Cannon Dallas TX
Used Bridge Crane Runway System Blueprint - W.W. Cannon Dallas TX

Images

Used Free Standing Bridge Crane Runway - W.W. Cannon, Dallas TX
Used Free Standing Bridge Crane - W.W. Cannon, Dallas TX
Used Free Standing Bridge Crane Motor - W.W. Cannon, Dallas TX

Applications

Typical Free-Standing Bridge Crane Applications

  • Heavy machine shops
  • Plastic molding centers
  • Plasma table
  • Heat treat
  • Tool maintenance
  • Die change operations
  • Product placement
  • Concrete material production
  • Steel distribution centers
  • Magnet cranes
  • Leased warehouses
  • Foundries

Contact us for availability and more information on the used free-standing crane system.

Or call us at 800-442-3061 to speak to a specialist.

CONTACT US

 

This entry was posted in Blog and tagged , . Bookmark the permalink.